2. PERFORMANCE
- 36 -
Copyright © 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Parameter
Spec.
Rx Min input Sensitivity
PER ≤ 10%
-76dBm@29.3Mbps, -73dBm@58.5Mbps, -71dBm@87.8Mbps
-68dBm@117Mbps, -64dBm@175.5Mbps, -60dBm@234Mbps
-59dBm@263.3Mbps, -58dBm@292.5Mbps, -53dBm@351Mbps,
-51dBm@390Mbps
Rx Max input Sensitivity
≥ -30dBm @ PER ≤ 10%(5170 ~ 5815 MHz)
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ 16dB@29.3Mbps, ACR ≥ 13dB@58.5Mbps,
ACR ≥ 11dB@87.8Mbps, ACR ≥ 8dB@117Mbps,
ACR ≥ 4dB@175.5Mbps, ACR ≥ 0dB@234Mbps
ACR ≥ -1dB@263.3Mbps, ACR ≥ -2dB@292.5Mbps
ACR ≥ -7dB@351Mbps, ACR ≥ -9dB@390Mbps
*ACR shall be measured by setting the desired signal’s strength 3 dB above the
rate-dependent sensitivity specified in min input sensitivity
17) NFC
Operate below 3 mode.
1) Card mode : Smart Card capability for mobile device(recognition distance : over 20mm)
2) Reader mode : Get information from tag(recognition distance : over 20mm)
3) Peer-to-peer mode : Device to device communication(recognition distance : over 5mm)