16
Assembling and Connecting to the Speakers
The speakers are detached from the speaker stands. Connect the speaker cables and assemble the front
speakers from speaker stands as illustrated.
To attach the speaker to the stand
How to connect the Speakers
Connect the speaker cables to the appropriate
terminals on the bottom of each front speaker.
After connecting the speaker cables to the
appropriate terminals on the bottom of each front
speaker and attach the front speakers to the
speaker stands.
Note:
If you hold the top of speakers when carring the front
or rear one, it may cause the seperation of speakers.
Therefore it might be damaged.
About Ferrite Core
Be sure to attach the ferrite core to the System
cable and power cord (for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Insert the System cable to the ferrite core and
wind the power cord once on the ferrite core.
3. Close the ferrite core unit it clicks.
Note:
Attach the ferrite core near the unit (Refer to the
fig.3 and comment.).
The length here is
short as much as
possible.
Summary of Contents for LH-RH9500P
Page 70: ...P NO 3834RH0073S ...