58
Radio Operation
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW). Before
tuning, make sure that you have turned down the vol-
ume.
11
Press FM/AM on the remote control until FM or
AM (MW) appears in the display window.
22
And then every time you press FM/AM, FM and
AM (MW) changes alternately.
33
Press and hold TUN.-
or TUN.+
on the
remote control for about three seconds until the
frequency indication starts to change, then
release.
Scanning stops when the Recorder Combi Receiver tunes
in a station. “ST” (for stereo program) appear in the dis-
play window.
44
Press ENTER on the remote control.
A preset number will flash in the display window.
55
Press PR/PRESET-
or PR/PRESET-
on the
remote control to select the preset number you
want.
66
Press ENTER on the remote control.
The station is stored.
77
Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press
TUN.- or
TUN.+
repeatedly in step 3 to
tune in the station manually.
To clear all the stored stations
Press and hold ENTER for about five seconds and
“MEM CLEAR” is appeared in the display window and
then press ENTER again, the stations are cleared.
If you have accidentally entered into the "MEM
CLEAR" mode and you do not wish to clear the mem-
ory, do not press any key. After a few seconds, the
"MEM CLEAR" display will go off by itself and change
to normal mode.
Listening to the Radio
Preset radio stations in the DVD Recorder Receiver’s
memory first (see “Presetting radio stations” on the left).
11
Press FM/AM until AM (MW) or FM appears in the
display window.
The last received station is tuned in.
22
Press
PR/PRESET- or
PR/PRESET-
repeat-
edly on the remote control to select the preset sta-
tion you want.
Each time you press this button, the DVD Recorder
Receiver tunes in one preset station at a time.
33
Adjust the volume by rotating VOLUME on the front
panel or by pressing or - on the remote
control repeatedly.
To turn off the radio
Press POWER to turn the DVD Recorder Receiver off
or select another function mode (AV 1, AV 2 etc.,).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUN.-
or TUN.+
on
the remote control repeatedly.
For automatic tuning, press and hold TUN.-
or
TUN.+
on the remote control for about three sec-
onds on the remote control.
For your reference
If an FM program is noisy
Press MO./ST. on the remote control so that “ST” dis-
appears in the display window. There will be no
stereo effect, but the reception will improve. Press
this button again to restore the stereo effect.
To improve reception
Reorient the supplied antennas.
