REFERENCE
61
Troubleshooting
Symptom
No power.
No picture.
No sound.
The playback picture is
poor.
The DVD Recorder
Receiver does not start
playback.
The picture from the
external input is distort-
ed
Some channels are
skipped over when
using
v
/
V
.
The picture or sound of
broadcasting channel is
weak or missing.
The picture from the
external input is not
shown.
Radio stations cannot
be tuned in.
Cause
The power cord is disconnected.
TV/DVD mode for the recorder is set to
TV.
The TV is not set to receive DVD
Recorder Receiver signal output.
The video cable is not connected
securely.
The connected TV power is turned off.
The equipment connected with the
audio cable(s) is not set to receive DVD
Recorder Receiver signal output.
The audio cables are not connected
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio connecting cord is damaged.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The Rating level is set.
The video signal from the external com-
ponent is copy-protected.
Those channels are not stored in the
Recorder.
Aerial or cables are loose.
The recorder’s source is incorrect.
The antenna is positioned or connected
poorly.
The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
Solution
Plug the power cord into the wall outlet
securely.
Press TV/DVD on the remote control
repeatedly to choose DVD mode. TV
indicator disappears in the display
window.
Select the appropriate video input mode
on the TV so the picture from the DVD
Recorder appears on the TV screen.
Connect the video cable securely.
Turn on the TV.
Select the correct input mode on the
Audio Receiver so you can listen to the
sound from the DVD Recorder Receiver.
Connect the audio cable securely.
Turn on the equipment connected with
the audio cable.
Replace it with new one.
Clean the disc.
Insert a disc. (Check that the disc indi-
cator in the display window is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Rating function or change
the rating level.
You cannot connect via this Recorder.
Connect the component directly to your
TV.
Restore channels. See “Program Edit”
on pages 24-25.
Tighten connections or replace cable.
Use AV to select input channel (AV1,
AV2, AV3, AV3 Opt, AV4 or DV)
Connect the antenna securely.
Adjust the antennas and connect an
external antenna if necessary.
Tune in the station manually.
Check the following guide for the possible cause of a problem before contacting service.