background image

Photo viewer

76

Viewing Image

Tap an image file icon in the Photo list screen to
view. The image appears in the View Image screen,
as shown below. 

The following buttons are provided to let you display
images from the View Image screen:

The 

m

or 

M

button lets you display the previous or

next image in the sequence of image files located in
the selected folder.

The 

X

button lets you pause the slide show.

To play again, touch the 

B

button.

The 

B

button lets you view all JPG and BMP images

in the current folder in Slide Show mode. Photo
Viewer shows all pictures in full-screen mode 
automatically at a certain rate. 

The “Rotate” button lets you move the image 
clockwise. Each tap rotates the image 90 degrees.

The “Repeat” button lets you set the repeat playback
mode.

: Plays repeatedly in within folder.

Off (No display): Plays repeatedly all files within SD 

memory card.

The “Return” button lets you return to the previous
screen.

The “Brightness” button lets you set the LCD 
brightness. (Dark: 0~100: Light)

The “List” button lets you return to the Photo list
screen.

The “Size” button lets you enlarge the small size of
image file.

Summary of Contents for LN790 Series


















































































































Reviews: