REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. These units are all glass
shelves.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.
IMPORTANT:
Do not clean glass shelves with warm
water when they are cold. Shelves may break if exposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebble-
sized pieces.
NOTE:
Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf
: Tilt up the front of the shelf in the
direction of (1) and lift it in the direction of (2). Pull the
shelf out.
To replace a shelf
: Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height.
Then lower the front of the shelf so that the hooks drop
into the slots.
NOTE:
Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf falling or
spilling food.
Sliding Out Shelves (optional on some models)
You can slide some glass shelves in and out of your
refrigerator as follows.
To slide the shelf out,
carefully pull front of shelf
toward you.
To slide shelf in,
push shelf in until it stops.
To remove a sliding shelf from its metal frame:
1.
Pull the shelf out to the stop position.
2.
Tilt the front of the shelf up and pull it past the stop position.
3.
Lift up the shelf to remove.
Replace the shelf
by reversing the above steps.
Convenience Shelves (optional on some models)
Folding Shelf:
You can store taller items such as gallon
containers or bottles by simply sliding the shelf back.
USING YOUR REFRIGERATOR
23
Summary of Contents for LRBC20512 Series
Page 38: ......
