HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT:
To avoid possible injury, product or property
damage, you will need two people to perform the following
instructions.
1. Removing Pullout Drawer
•
Pull the drawer open to full extension. Remove the
screw (1) from each side of rail system.
•
Remove the lower basket (2) by lifting basket from rail
system.
•
Lift the top of door to unhook door supports from rail
system. Lift door up to remove.
w
CAUTION:
When you remove the drawer, do not hold
handle. If it’s taken off, it could cause personal injury.
w
CAUTION:
When laying down the drawer, be careful
not to damage the floor and hurt your feet by the sharp
edges on hinge side.
2. Installing Pullout Drawer
•
Pull both rails (1) out to full extension.
•
Hook the door supports (2) into the rail tabs (3), as
illustrated, and lower the door into final position.
•
With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly until it doesn’t
move forward.
w
WARNING:
To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
w
WARNING:
DO NOT step or sit down on Freezer Door.
REFRIGERATOR INSTALLATION
13
1
1
3
2
4
2
Summary of Contents for LRFC21755 Series
Page 34: ...NOTE 35 ...