28
OPERATION
Setting the Convection auto Conversion Function
(For Model: LrG3193, LrG3194)
When using convection bake, the convection auto
conversion feature will automatically convert entered
regular baking temperatures to convection baking
temperatures. This feature is activated so that the
display will show the actual converted temperature.
For example, if you enter a regular recipe temperature
of 350°F and press the START button, the display will
show the converted temperature of
325˚F
.
1
Press and hold the
Clock
button for 3 seconds
(for model: LRG3193).
Press and hold the
Timer on/off
button for 3
seconds (for model: LRG3194).
2
Press
Clock
repeatedly until
auto
appears in
the display (for model: LRG3193).
Press
Timer on/off
repeatedly until
auto
appears in the display (for model: LRG3194).
3
Press the
+/-
button to switch Auto Conversion
on or off.
4
Press
STarT
to accept the change.
Lockout
The Lockout feature disables most oven controls. It
does not disable the timer or interior oven light or lock
the oven door.
1
Press and hold the
Clear/off
button for three
seconds. A melody sounds and
appears
in the display.
2
To deactivate the Lockout feature, press and
hold the
Clear/off
button for three seconds.
Cook Time (Timed Cook)
Set the oven to cook for a specific length of time
using the Timed Cook feature. This feature can only
be used with the
Bake
modes.
Setting a Timed Cook
1
Press
Cook Time
.
2
Press
+/–
button to set the time of day.
3
Press the
Start
button. The clock is set, and the
display reflects the change after a short delay.
removing and replacing the oven
racks
CaUTIoN
•
Replace the oven racks before turning the oven
on to prevent burns.
•
Do not cover the racks with aluminum foil, or
any other material, or place anything on the
bottom of the oven. Doing so will result in poor
baking performance and may damage the oven
bottom.
•
Only arrange oven racks when the oven is cool.
removing racks
1
While wearing oven mitts, grasp the oven rack*.
2
Pull the rack straight out until it stops.
3
Lift up the front of the rack.
4
Pull out the rack.
* When possible, adjust oven racks before using the
oven. Always wear oven mitts if adjusting racks while
the oven is on.
replacing racks
1
While wearing oven mitts, place the end of the
rack on the support*
2
Tilt the front end of the rack up.
3
Push the rack in.
4
Check that the rack is properly in place.
*When possible, adjust oven racks before using the
oven. Always wear oven mitts if adjusting racks while
the oven is on.