11-3
Copyright ©
LG Electronics Inc. All rights reserved.
Only training and service purposes
TROUBLE SHOOTING
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
“Crackling” or “popping”
sound
• This is the sound of the metal
heating and cooling during both
the cooking and cleaning
functions.
• This is normal.
Oven control beeps and
displays any F code error.
CODE
CAUSE
F-1
Open oven sensor
F-2
Shorted oven
sensor
F-6
Oven is too hot
F-9
No heating
• See the page 9-1 in this manual
Oven racks are difficult to
slide
• The oven racks were cleaned in a
self-clean cycle.
• Apply a small amount of vegetable oil to a
paper towel and wipe the edges of the oven
racks with the paper towel. Do not use
lubricant sprays.
Power outage, clock flashes • Power outage or surge.
• Reset the clock. If the oven was in use, you
must reset it by touching the “CLEAR OFF”
pad, setting the clock and resetting any
cooking function.
“Burning” or “oily” odor
emitting from the vent
• This is normal in a new oven and
will disappear in time.
• To speed the process, set a self-clean cycle
for a minimum of 3 hours. See the “USING
THE SELFCLEANING OVEN” section.
Strong odor
• An odor from the insulation
around the inside of the oven is
normal for the first few times the
oven is used.
• This is temporary.
Drawer does not slide
smoothly or drags
• The drawer is out of alignment.
• Drawer is over-loaded or load is
unbalanced.
• Fully extend the drawer and push it all the
way in. See “CARE AND CLEANING OF
THE RANGE” section in user’s guide.
• Reduce weight. Redistribute drawer contents.
Summary of Contents for LRGL5821S
Page 71: ......
