42
To record one TV program while
watching another
1
Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
2
Using the TV, select the channel to be viewed.
Tip (VCR mode only)
Always use PAUSE/STEP (
X
) for best results when making
changes during recording .
For example: To change channels during recording, first
press PAUSE/STEP (
X
) to put the unit in pause mode.
Then select the desired channel on the VCR/DVD Recorder,
and press PAUSE/STEP (
X
) again to resume recording.
T
T
imer Recording
imer Recording
The Timer Recording function allows you to record up
to 8 programs within a period of one month.
1
Press TIMER REC.
The Timer Record menu will appear.
•
Media – Choose a media (DVD or VCR).
•
Ch. – Choose a channel (2-69 or 1-125 for
antenna or cable channels respectively,
excluding skip channels), or one of the exter-
nal inputs from which to record (AV1 or AV2).
•
Date – Choose a date up to 1 month in
advance, or select a daily or weekly program.
•
Start Time – Set the recording start time.
•
End Time – Set the recording end time.
•
Mode – Choose a record mode.
DVD: EP, LP, SP, XP, or AT (Auto)
VCR: SP, SLP, or AT (Auto)
AT(Auto) mode determines how much time is avail-
able on the disc or tape and switches record mode,
if necessary, to complete recording the program.
2
Enter the necessary information for your timer
recording(s).
•
b / B
(left/right) – Move the cursor left/right
•
v / V
(up/down) – Change the setting at the
current cursor position
•
Press RETURN (
O
) to exit the Timer Record
menu.
•
Press TIMER REC to display Timer Record
List.
3
Press ENTER to save the program.
The Timer Record List will appear.
4
Press RETURN (
O
) to exit the Timer Record
List.
5
Be sure to load a recordable disc or tape.
Notes:
•
The Timer indicator lights on the front panel dis-
play.
•
If the Disc and Tape indicator are blinking, either
no disc or tape is loaded, or the loaded disc is not
recordable.
•
The VCR/DVD Recorder will record the audio
according to the current TV tuner setting (Stereo,
Mono or SAP). Use the AUDIO button to set the
audio before switching the VCR/DVD Recorder to
Standby mode.
•
The VCR/DVD Recorder will automatically power
off when the Timer Recording ends.
•
There is a short delay when a timer recording fin-
ishes to confirm the recorded program. If two
timer recordings are set to record sequentially
(one right after the other), the very beginning of
the later program may not be recorded.
•
You must press STOP to stop the Timer
Recording.
Checking Timer Recording Details
Programming can be checked whenever the
VCR/DVD Recorder is turned on. Press TIMER REC
twice.
•
Use
v / V
to select a timer recording.
•
Press ENTER to edit the selected program.
Timer Record menu appears.
•
Press CLEAR to delete the selected program from
the Timer Record List.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
•
Use
v / V
to select a program you want to erase
on the Timer Recorder List. If you want to erase
the program, press CLEAR.
INTRODUCTION
HOOKUP
PLA
YBACK
RECORDING
EDITING
REFERENCE
TIMER REC
Media
Ch.
Date
Start Time
End Time
Mode
Timer Record
OK
Timer Rec List
Close
198 min Free
Ch.11
DVD
01/02 Fri
10:07 AM
11:00 AM
EP
SP
Media
Start Time
Duration
Date
Ch.
Mode
Check
Timer Record List
Edit
Close
Delete
CLEAR
10/19 Sun
Ch.11
18:07 AM
30min
SP
Rec. OK
Timer Rec
TIMER REC
Summary of Contents for LRY-517
Page 26: ...26 ...