42
TROUBLESHOOTING
Problem
Possible Causes / Solutions
Excessive smoking
during a self clean cycle
• Excessive soil.
- Touch the
CLEAR/OFF button. Open the windows to rid the room of smoke. Wait until the
self clean mode is cancelled. Wipe up the excess soil and reset the Selft Clean function.
The oven door is not
opening after a Self
Clean cycle.
• Oven is too hot.
- Allow the oven to cool.
Oven not clean after a
self clean cycle
• Oven controls not properly set.
- See the Self Clean section.
• Oven was heavily soiled.
- Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to
self clean again or for a longer period of time.
CLEAN and DOOR flash
in the display
• The self clean cycle has been selected but the door is not closed.
- Close the oven door.
LOCKED is on in the
display when you want
to cook
• The oven door is locked because the temperature inside the oven has not dropped below
the locking temperature.
- Touch the
CLEAR/OFF button. Allow the oven to cool.
Burning or oily odor
emitting from the vent
• This is normal in a new oven and will disappear in time.
- To speed the process, set a self clean cycle for a minimum of 3 hours.
See the self clean section.
Oven racks are difficult
to slide
• The shiny, silver-colored racks were cleaned in a self clean cycle.
- Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven
racks with the paper towel.
Oven door will unlock
after Self Clean cycle
• Oven interior is still hot. Allow about one hour for the oven to cool after the completion of a
self clean cycle. The door can be opened when the LOCK indicator is not displayed.
• The control and door may be locked.
Moisture collects on
oven window or steam
comes from oven vent.
• This is normal when cooking foods high in moisture.
• Excessive moisture was used when cleaning the window.
