19
OPERATION
ENGLISH
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for three seconds.
Then press
Start Time
repeatedly until
AdJU
appears in the display.
3
To increase the temperature, press
plus (+)
until
the desired amount appears in the display.
To decrease the temperature, press
minus (-)
until the desired amount appears in the display.
4
Press
Start
to accept the change.
NOTE
•
This adjustment does not affect the broiling
or Self Clean temperatures. The adjustment
is retained in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
•
Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes until the oven door is
opened.
You can activate or deactivate the preheating alarm
light.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for three seconds.
Then press
Start Time
repeatedly until
PrE
appears in the display.
3
Press
plus(+)
or
minus(-)
to turn the function
on/off.
4
Press
Start
to accept the change.
Adjusting the Beeper Volume
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for three seconds.
Then press
Start Time
repeatedly until
Beep
appears in the display.
3
Press
plus(+)
or
minus(-)
to select the desired
volume.
4
Press
Start
to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for three seconds.
Then press
Start Time
repeatedly until
Unit
appears in the display.
3
Press
plus(+)
or
minus(-)
to select
F(Fahrenheit) or C(Centigrade).
4
Press
Start
to accept the change.
Lockout
The Lockout feature automatically locks the oven
door and prevents most oven from being turned on. It
does not disable the timer and the interior oven light.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Probe
for three seconds.
3
The lock melody sounds,
Loc
appears in the
display and the lock icon blinks in the display.
4
Once the oven door is locked, the lock
indicator stops blinking and remains on.
5
To deactivate the Lockout feature, press and
hold
Probe
for three seconds. The unlock
melody sounds and the door and the controls
unlock.
NOTE
The
Burner On
indicator light turns on when the
knob is turned even if the cooktop element does
not operate.
