- 6 -
LOCATION OF MODEL NUMBER
To request service information or replacement parts,
the service center requires the complete model number
of your microwave oven. The model number is on the
oven front as shown in the illustration below.
OVEN SPECIFICATIONS
Power Supply
120 V AC, 60 Hz
Rated Current
Microwave
14.0 A
Convection
14.0 A
Rated Power
Input
Microwave
1650 W
Convection
1650 W
Power Output
Microwave
950 W
Overall Dimensions(WxHxD)
29
15
/
16
" x 16
7
/
16
" x 15
3
/
8
"
Oven Cavity Dimensions
(WxHxD)
21
1/4
" x 9
9/16
" x 14
3/16
"
Capacity of Oven Cavity
1.7 cu.ft
ELECTRICAL REQUIREMENTS
The oven is designed to operate on a Standard
120 V/60 Hz household outlet. Be sure the circuit is at
least 15 A or 20 A and the microwave oven is the only
appliance on the circuit. It is not designed for 50 Hz or
any circuit other than a 120 V/60 Hz circuit.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
WARNING
- Improper use of the
grounding can result in a risk of electric shock.
Consult a qualified electrician or service person if the
grounding instructions are not completely understood,
or if doubt exists as to whether the appliance is
properly grounded.
Because this appliance fits under the cabinet, it has a
short power-supply cord. Do not use an extension cord.
If the power supply cord is too short, have a qualified
electrician or service person install an outlet near the
appliance. A short power supply cord is provided to
reduce the risks resulting from becoming entangled in
or tripping over a longer cord.
See the separate Installation Instructions for directions
on placing the cord properly.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
PRODUCT OVERVIEW
MODEL NUMBER LABEL
Ensure proper ground
exists before use