2.5 Install the R-UIM card.
1. Insert and slide the R-UIM card into the R-UIM
card holder Make sure that the R-UIM card is
inserted properly and that the gold contact are
on the card is facing downwards.
2. To remove the R-UIM card, press down lightly
and pull it in the reverse direction.
N
No
ottee
The metal contact of the R-UIM card Can be easily
damaged scratches. Pay special attention to the
R-UIM card while handing. Follow the instructions
Supplied with the R-UIM card.
3. Make sure the power is off before you remove
the R-UIM card. Removing the R-UIM card from
the phone when the power is on may cause the
phone to malfunction.
4. Some of menu are working properly, when R-UIM
card are installed.
ex) Names/UIM, Messages/Archive in UIM,
Security/UIM Setup, Joy Box/UTK...
5. If you enter the PIN code incorrectly into the
phone 3 times in a row, then the R-UIM card will
be blocked and you will require a PUK code from
your network/service provider.
Introduction
Introduction
15
Introduction
Introduction
14
2.4 Installation Steps
Please follow the procedure below to install the phone properly.
Connect base-
handset to the
handset connector.
Turn the antenna
upright.
If you want to use the
R-UIM card. open the
battery cover and
insert the card.
Connect the antenna
to the TNC connector
(Turn right).
When you first use the
Phone, please Turn
“on” the battery
switch.
1
2
3
5
4
Press
button to operate
initially.
EEN
ND
D//PPW
WR
R
6
■
Before using the phone, please check that the battery switch is “on”.
■
After switching if “on”, use the phone.
■
When charging the battery, check that the battery switch is “on”.
■
The battery will be charged only when the battery switch is “on”.
N
No
ottiiccee::
Summary of Contents for LSP-3510
Page 30: ......