manualshive.com logo in svg

LG LSRG309ST, Service Manual

The LG LSRG309ST gas range offers exceptional cooking performance and versatility. Perfect for empowering home chefs, this sleek appliance features a spacious oven, powerful burners, and intuitive controls. Enhance your culinary experience with the user-friendly Owner's Manual, available for free download at 88.208.23.73:8080. Get cooking today!

Share
Download
background image

(Page)

COMPONENT TEST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1 ~ 4-4

• Convection Motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
• Door locking Motor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
• Micro Switch (normally open type) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
• Oven Sensor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
• Door switch  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
• Oven lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
• Warming Drawer heater  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
• Broil or bake igniter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4
• Oven (safety) valve - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4
• Ignition switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4

CONVERSION TO LP GAS  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1 ~ 5-5

COMPOSITION OF CONTROL  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1 ~ 6-2

• Oven Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2
• Power PCB- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2
• Rellay PCB  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2

DIAGNOSIS THROUGH SCHEMATIC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1

CHECK THE FAILURE CODE (F-code) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-1

FAILURE CODE SUMMARY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-1

CHECKING FLOW CHART BY FAILURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-1 ~ 10-17

• Power Failed(Dead), No display?  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-2 ~ 10-3
• Oven does not heat, F-11  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-5 ~ 10-6
• Warm drawer does not heat  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-7
• Door Lock  System Failure, F-10? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-9
• Sensing Fail, F-1, F-2? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-11
• Oven too hot, F-6, F-16?  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-13 ~ 10-14
• F-3 error (Touch-sensor key error) Or Key does not input - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-16
• Key operation Test  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-17

TROUBLE SHOOTING  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-1 ~ 11-4

EXPLODED VIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12-1 ~ 12-6

REPLACEMENT PARTS LIST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13-1 ~ 13-4

Summary of Contents for LSRG309ST














































































Reviews:

No comments

Related manuals for LSRG309ST

GE Cafe series Dimensions And Installation Information preview
Cafe series
Brand: GE Pages: 3
GE Profile PGS968SEPSS Installation Instructions preview
Profile PGS968SEPSS
Brand: GE Pages: 2
Broil King PR-S1 Use & Care Manual preview
PR-S1
Brand: Broil King Pages: 2
Maytag YMER8775AS User Instructions preview
YMER8775AS
Brand: Maytag Pages: 40
Capital CGSR604B4 Specifications preview
CGSR604B4
Brand: Capital Pages: 4
Sharp Insight-Pro KB-4425L Installation Manual preview
Insight-Pro KB-4425L
Brand: Sharp Pages: 8
Sharp Insight-Pro KB-3425L Installation Manual preview
Insight-Pro KB-3425L
Brand: Sharp Pages: 8
Sharp Insight KB-4425LK Installation Manual preview
Insight KB-4425LK
Brand: Sharp Pages: 8
Sharp Insight Electric Rang Installation Manual preview
Insight Electric Rang
Brand: Sharp Pages: 8
Sharp KB-3000JS Operation Operation Manual preview
KB-3000JS Operation
Brand: Sharp Pages: 32
Sharp K-60M15BL2-FR User Manual preview
K-60M15BL2-FR
Brand: Sharp Pages: 73
Sharp Insight KB-4425LK Service Manual preview
Insight KB-4425LK
Brand: Sharp Pages: 76
Sharp Insight-Pro KB-3425L Operation Manual preview
Insight-Pro KB-3425L
Brand: Sharp Pages: 48
Sharp K-71F28AM2-EU User Manual preview
K-71F28AM2-EU
Brand: Sharp Pages: 126
DeLonghi PEM 965 GHI Series Instructions For Use Manual preview
PEM 965 GHI Series
Brand: DeLonghi Pages: 84
Maytag MER7662WB0 Parts List preview
MER7662WB0
Brand: Maytag Pages: 7
Maytag MER6775BAS18 Parts List preview
MER6775BAS18
Brand: Maytag Pages: 10
Maytag MER6765BAB17 Parts List preview
MER6765BAB17
Brand: Maytag Pages: 10

Brands by name

Popular brands

Load more brands