3-16
COMPONENT ACCESS
REMOVING & REPLACING THE LIT
REMOVING & REPLACING THE LIT
-OFF OVEN DOOR
-OFF OVEN DOOR
AND DRA
AND DRA
WER
WER
Replacing the Door
1. Firmly grasp
both sides of the
door at the top.
2. With the door at
the same angle
as the removal
position, seat
the indentation
of the hinge
arms into the
bottom edge of
the hinge slots. The notch in the hinge arms must be
fully seated into the bottom edge of the slots.
3. Open the door fully. If the door will not open fully, the
indentation is not seated correctly in the bottom edge
of the slots.
4. Lock the hinge locks,
rotating them back toward
the slots in the oven frame
until they lock.
5. Close the oven door.
Removing the Door
1. Fully open the door.
2. Unlock the hinge locks,
rotating them as far
toward the open door
frame as they will go.
3. Firmly grasp both sides of the door at the top.
4. Close the door to the removal
position (approximately five
degrees) which is halfway
between the broil stop
position and fully closed.
If the position is correct, the
hinge arms will move freely.
5. Lift door up and out until the hinge arm is clear of the
slot.
Slot
Lock
Unlock
Hinge
lock
about 5°
Hinge arm
Indentation
Bottom
edge of slot
Hinge arm
Hinge lock
<Fig.1>
<Fig.2>
CAUTION
• Be careful when removing and
lifting the door.
• Do not lift the door by the handle.
- The door is very heavy.
