GENERAL INFORMATION
LAMP REPLACEMENT
1. Unplug the power cord from the outlet
2. Open the cover lamp
3. Turn the lamp counterclockwise
4. Assemble in reverse order of disassembly
.
Replacement bulb must be the same specification as original.
(E14 type).
VACATION TIME
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.
POWER FAILURE
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice on
top of your frozen packages.
ANTI-CONDENSATION PIPE
The outside wall of the refrigerator cabinet may
sometimes get warm,
especially just after
installation.
Don't be alarmed.
This is due to the anti-
condensation pipe, which
pumps hot refrigerant to
prevent "sweating" on the
outer cabinet wall.
Caution
Electrical Shock Hazard
Before replacing a burned-out light bulb,
either unplug the refrigerator or turn off
power at the circuit breaker or fuse box.
NOTE
:Moving the control to the OFF position
does not remove power to the light circuit.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.
This appliance is intended to be used in
household and similar applications such as:
- Staff kitchen areas in shops, offices and
other working environments.
- Farm houses and by clients in hotels, motels
and other residential type environments.
- Bed and breakfast type environments.
- Catering and similar non-retail applications.
1
4
