Page 20 of 50
Set Bits per second (baud rate) to
19200
, Data bits to
8
, Parity to
Non
e, Stop bits to
1
,
and Flow control to
Non
e. Click
O
K.
The Setup screen appears in the HyperTerminal window. If the text does not appear
immediately, press
Ente
r.
If the Access Point has no problem, you can find prompt on the terminal program’s
display box:
Type
disconfig
and press
Enter
to see current default settings of Access Point. Make a
note of the SSID, Channel number and IP address. LG Access Point has a default IP;
100.100.100.100
