10
If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation Menu’ are
applied whenever turn on power.
y
Following Parameters are applied to basic.
»
Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
»
Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
»
AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these,
other parameters are applied differently according to the TV-Set.
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y
The modes are as follows:
»
Aspect ratio = “Disabled(0)” stays at previous state, same as consumer model.
»
Aspect ratio = “Set by Program(1)”
»
Aspect ratio = “4:3 ratio (2)”
»
Aspect ratio = “16:9 ratio (3)”
y
If enabled, upon power up the television reset the aspect ratio to the specified state regardless of
how the user has previously changed the aspect ratio.
(8-3) A/V Setting
(8-4) Aspect ratio
Instead of ‘Audio Only’, the name of a radio channel is displayed on the screen when a radio broadcast is
playing.
y
Set to Yes(Work) or No(Do Not Work).
y
If the setting is ‘Yes’, the name of a radio channel is displayed for the radio channel.
y
If the setting is ‘No’, the text ‘Audio Only’ is displayed for the radio channel.
(10) radio Name Display
y
Available Input Source List
y
Decide whether selected ‘Input Source’ is usable (Enable) or not (Disable).
y
User cannot disable the current input’s ‘Aux Source Setting’.
(9-1) input Source
(9-2) Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When ‘Aux Source
Setting’ is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
(9) Aux Source Setting
Summary of Contents for LY330C
Page 32: ...32 ...
