LG LY330C, Installation Manual

15

USB Cloning

An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have 

the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and 

the Channel Map. This newer procedure significantly decreases the installation time that would be 

necessary if the standard RS-232C method were used instead.

introduction
(1) Overview uSB Cloning Procedure 

y

Commercial TVs have the capability to support cloning internal TV data and programme information  

with an external clone device called “USB Cloning”, in order to copy TV data accurately and 

quickly. The clone internal functions use slightly different internal processes for the two types of 

commercial TVs. However, the UI of cloning feature remains the same in both.  

Regarding the demands over the current cloning feature for quicker clonin g, better portability and 

etc, we would like to announce the cloning process via USB port, named as USB Cloning.

USB cloning process is divided into 2 main processes. One is writing the previously saved TV data 

into the TV, and one another is reading of current TV data into USB memory card. To avoid any 

confusion due to the words, it is clearly specified as “Receive from USB” and “Send to USB” in the 

whole process.

(2) Data To Be Cloned  

y

The data cloned are the same data cloned by previous USB Cloning. Details are explained in the 

following:  

1. TV data includes: 

    A. Installer Menu settings  

    B. Main menu settings (Audio, Picture etc) 

2. Analog / Digital Channel information includes: 

    A. Channel numbers 

    B. Channel label 

    C. Channel attributes including channel type, skipping status and etc.

(3) input Source

y

The user needs a USB memory card with FAT formatted to make successive cloning via USB port. 

A USB memory card size more than 128 Mega Bytes and less than 4 Giga Bytes is recommended.  

 NOTE

y

Currently, support the preceding USB file system for FAT file format only. Other file formats 

including NTFS is not currently supported. Microsoft Windows officially supports FAT for the USB 

memory card.