background image

1

Safety Precautions

Please read these safety precautions carefully before using the product.

Precautions in installing the Product

If you ignore the caution message, you may be slightly injured or the product may be damaged.

If you ignore the warning message, you may be seriously injured or there is a possibility of
accident or death.

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the

nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not put heavy objects on the product or sit upon it. 

- If the product collapses or is dropped, you may be injured. Children must pay particular attention.

Do not leave the power or signal cable unattended on the pathway.

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

Install the product in a neat and dry place.

- Dust or moisture can cause electrical shock, fire or product damage. 

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center. 

- If you continue to use without taking proper measures, electrical shock or fire can occur.

If you dropped the product or the case is broken, turn off the product and unplug the power cord. 

- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service

center.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.

- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and

contact the service center.

Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more

than 10cm from the wall)

- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.

Do not block the ventilation hole of the product by a tablecloth or curtain.

- The product can be deformed or fire can break out due to overheating inside the product.

Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken.

Install the product where no EMI occurs.

Keep the product away from direct sunlight.

- The product can be damaged.

Warning

Warning

Caution

Caution

Summary of Contents for M5500C-BAF.AEU





































Reviews: