Operating
10
Operating
3
When a station is stored on the
preset numbers on which another
station of the same band has already
been preset, the previously preset
station is automatically erased.
,
Note
Listening to a preset station
1. Press BAND
repeatedly to select a
desired band.
2. Press the volume knob on the unit.
Or press ENTER
on the remote control.
3. Rotate the volume knob to select a
preset station.
Or press
w
/
s
on the remote control.
4. Press the volume knob.
Or press ENTER
on the remote control.
Or
Press BAND and then press the desired
preset button among 1 to 6 on the
remote control.
Or press
W/S
on the unit to move to
the previous or next preset station.
Adjusting TUNER settings
On the unit
1. Press FUNC.
2. Rotate the volume knob to select an
item and press it.
3. Rotate the volume knob to set the
option and press it.
4. If you want to return to the previous
step, press
.
On the Remote Control
1. Press FUNC
/ •
MENU.
2. Press
w
/
s
to select an item and press
ENTER.
3. Press
w
/
s
to set the option and press
ENTER.
4. If you want to return to the previous
step, press
.
PTY (Program type, RDS (OPTIONAL))
It searches the radio stations by
program type of FM tuner.
The program types are displayed as
follows.
NEWS
FINANCE
EASY M
AFFAIRS
CHILDREN
LIGHT M
INFO
SOCIAL
CLASSICS
SPORT
RELIGION
OTHER M
EDUCATE
PHONE IN
JAZZ
DRAMA
TRAVEL
COUNTRY
CULTURE
LEISURE
NATION M
SCIENCE
DOCUMENT
OLDIES
VARIED
POP M
FOLK M
WEATHER
ROCK M
A / S (Auto Store)
The six strongest broadcasting
frequencies will be stored under preset
button 1 to 6 in the order of their signal
strength. To cancel, press the volume
knob.
P / S (Preset scan)
Each preset station appears. To cancel,
press the volume knob.
SENS (Tuner sensitivity) MID / HI / LOW
In an area in which signal reception is
weak, it helps the tuner to search more
stations. The weaker the reception is,
the lower option you should set to.
RDS (OPTIONAL)
AF (Alternative Frequency) ON / OFF
When the reception quality drops, the
tuner automatically changes to another
station in the network, broadcasting a
better reception quality, using the PI
and AF codes.
REG (Region) ON / OFF
REG ON : The unit switches to another
station, within the same network,
broadcasting the same program when
the receiving signals from the current
station become weak.
REG OFF : The unit switches to another
station, within the same network when
the receiving signals from the current
station become weak. (In this mode,
the program may diff er from the one
currently received.)
TA (Traffi
c Announcement) ALARM /
SEEK
TA ALARM : When the tuned station
has no TP information for 5 seconds,
a
double beep sound is output.
TA SEEK : When the tuned station does
not receive TP information for 5 seconds,
the receiver retunes to the next station
that has the TP information.
PI (Programme Identifi cation) SOUND /
MUTE
PI SOUND : When the frequency
of a tuned station switches to an
AF (Alternative frequency) with an
unidentifi ed PI, it keeps the sound.
PI MUTE : When the frequency of a
tuned station switches to an AF with an
unidentifi ed PI, it mutes the sound until
the PI is identifi ed.
CT (Clock Time) ON / OFF
You can use the RDS CT information
to update the time. When RDS CT
information is not received and then
you set CT to OFF, you can adjust the
time by yourself. Refer to the page 9 for
setting the clock.
