3-47
11-3. PIN FUNCTION
Function Name
I/O
Function
After Reset
Altemate Function
P00
P01
P02
P03
P04
P05
P06
I/O
Port 0.
Input port
7-bit I/O port.
Input/output can be specified in 1-bit units.
Use of an on-chip pull-up resistor can be specified by
a software setting.
I/O
Port 1.
Input port
8-bit I/O port.
Input/output can be specified in 1-bit units.
Use of an on-chip pull-up resistor can be specified by
a software setting.
I/O
Port 3.
Input port
4-bit I/O port.
Input/output can be specified in 1-bit units.
Use of an on-chip pull-up resistor can be specified by
a software setting.
I/O
Port 4.
Input port
8-bit I/O port.
Input/output can be specified in 1-bit units.
Use of an on-chip pull-up resistor can be specified by
a software setting.
I/O
Port 5.
Input port
8-bit I/O port.
Input/output can be specified in 1-bit units.
Use of an on-chip pull-up resistor can be specified by
a software setting.
I/O
Port 6.
Input port
8-bit I/O port.
Output of P60 to P63 is N-ch open-drain output(6V tolerance).
Input/output can be specified in 1-bit units.
Only for P64 to P67, use of an on-chip pull-up resistor
can be specified by a software setting.
I/O
Port 2.
Analog input
8-bit I/O port.
Input/output can be specified in 1-bit units.
P10
P11
P12
P13
P14
P15
P16
P17
SCK10/TxD0
SI10/RxD0
SO10
TxD6
RxD6
TOH0
TOH1/INTP5
TI50/TO50
P20 to P27
ANI0 to ANI17
P40 to P47
-
P50 to P57
-
P30
P31
P32
P33
INTP1
INTP2
INTP3
TI51/TO51/INTP4
P60
P61
P62
P63 to P67
SCL0
SDA0
EXSCL0
-
TI000
TI010/TO00
SO11
SI11
SCK11
TI001/SSI11
TI011/TO01
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only