11
Setting the Clock
1. Press for at least 2 seconds:
2. Choose from either: AM 12:00 (for an am and pm dis-
play) or 0:00 (for a 24 hour display).
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:
ON PLAYER
CLOCK
MULTI JOG
SET
MULTI JOG
SET
MULTI JOG
SET
Fall asleep while listening to your player
Press SLEEP on the remote control one or more times to select delay time
between 10 and 180 minutes, after the player will turn off. Press SLEEP on the
remote control repeatedly, the display changes in the following order, correspon-
ding icons & dimmer ON
→
SLEEP 180 (dimmer ON)
→
SLEEP 150 (dimmer
ON)
→
SLEEP 120 (dimmer ON)
→
SLEEP 90 (dimmer ON)
→
SLEEP 80 (dim-
mer ON)
→
SLEEP 70 (dimmer ON)
→
SLEEP 60 (dimmer ON)
→
SLEEP 50
(dimmer ON)
→
SLEEP 40 (dimmer ON)
→
SLEEP 30 (dimmer ON)
→
SLEEP
20 (dimmer ON)
→
SLEEP 10 (dimmer ON)
→
SLEEP OFF & dimmer OFF.
DEMO
Press DEMO in power off state to demonstrate the function on display window.
Press again to cancel.
Use your player as an alarm clock
Press and hold TIMER on the player for two seconds. Each function, TUNER,
CD, USB, TAPE flashes for two seconds. Press SET on the player when the
function you want to be woken by is showing.
If you choose TUNER, ‘PLAY’ and ‘REC’ flash, PLAY and REC. Choose one of
them. If you choose TUNER and PLAY you will be shown the stations you have
saved as presets. Use MULTI JOG on the player to select the station you want,
then press SET.
You will be shown the ON TIME display. This is where you set the time you want
the alarm to go off. Use MULTI JOG on the player to change the hours and min-
utes and SET to save.
You will then be shown the OFF TIME display. This is where you set the time
you want the function to stop. Use MULTI JOG on the player to change the
hours and minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use MULTI JOG on the player to change the volume and SET to save. Switch
the system off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for by
pressing TIMER. You can also turn the alarm on and off by pressing TIMER. To
set the alarm to go off at a different time, switch the system on and repro-
gramme following the same steps as initially.