14
Presetting the Radio Stations / Listening
Presetting the radio stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned the vol-
ume down to the minimum level.
1
Press TUNER/BAND on the remote control to show
either FM or AM in the display window. Or Press
TUNER on the front panel.
Every time you press this button, AM and FM
changes alternately.
2
Select a station you want by pressing
TUNING (-/+) on the front panel or
b
/
B
on the
remote control.
Note
Note
• Automatic Tuning
Press TUNING (-/+) or
b
/
B
for more than 0.5
second.
- Scanning stops when the unit tunes in a station.
• Manual Tuning
Press TUNING (-/+) or
b
/
B
briefly and repeatedly.
3
Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
4.
Press
v /V
on the remote control to select the pre-
set number you want.
5
Press PROG./MEMO. again.
The station is stored.
6
Repeat steps 1 (or 2) to 5 to store other stations.
To clear all memorized stations
Press and hold PROG./MEMO. on the remote control
for about two seconds, “ERASE ALL” appears in the dis-
play window and then press PROG./MEMO. on the
remote control, the stations are cleared.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 4-5 .
To recall preset numbers
Press and hold
v /V
on the remote control until the
desired preset number appears or press the button
repeatedly.
Listening to the radio
1
Press TUNER/BAND on the remote control to show
either FM or AM in the display window. Or Press
TUNER on the front panel.
The last received station is tuned in.
2
Press
v /V
on the remote control repeatedly to
select the preset station you want.
Each time you press this button, the unit tunes in
the next preset station.
3
Adjust the volume by turning VOLUME
CONTROL KNOB (or pressing VOLUME (-/+) on
the remote control) repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Manual Tuning”.
• For automatic tuning, see “Automatic Tuning”.
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
To turn the radio off
Press POWER to turn off the unit or select another
function mode
(CD/DVD, TAPE, AUX or USB) .
For your reference
• If a FM program is noisy ;
Press ST./MONO repeatedly so that that “STEREO”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
ST./MONO again to restore the stereo effect.
• To improve reception;
Reposition the supplied antennas.
