11
INSTALLATION
Ambient Temperature
Install this appliance in an area where the
temperature is between 13°C and 43°C. If the
temperature around the appliance is too low or
high, cooling ability may be adversely affected.
Do not store the refrigerator in Direct Sunlight
or sheltered outdoor areas.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of
the refrigerator to open the doors and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
2” (5.08 cm)
Removing/Assembling the
Refrigerator Door Handles
Removing the Handles
1
Loosen the set screws with a
3
/
32
in.
Allen key and remove the handle.
2
Only if required, loosen the mounting
fasteners that connect to the refrigerator
door and handle using a
1
/
4
in. Allen key,
remove the mounting fasteners.
Assembling the Handles
1
If already removed, assemble the
mounting fasteners at both ends of the
handle using a
1
/
4
in.
Allen key.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a
3
/
32
in. Allen key.
NOTE
Removing the doors is always
recommended when it is necessary to
move the refrigerator through a narrow
opening. If it is necessary to remove the
handles, follow the directions below.
Summary of Contents for MFL63264269
Page 48: ......