10
ENGLISH
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
t
If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
CAUTION
t
Make sure that children do not climb on or hang on the TV.
NOTE
t
Use a platform or cabinet that is strong and large enough to
support the TV securely.
t
Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer.
We recommend the use of LG’s wall mount bracket. LG’s wall mount
bracket is easy to move with cables connected. When you do not use
LG’s wall mount bracket, please use a wall mount bracket where the
device is adequately secured to the wall with enough space to allow
connectivity to external devices. It is advised to connect all the cables
before installing fixed wall mounts.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall mounting bracket)
Model
OLED55/65B6*
OLED55/65E6*
OLED55/65C6*
VESA (mm) (A x B)
300 x 200
400 x 200
Standard screw
M6
M6
Number of screws
4
4
Wall mount bracket
OTW420B
OTW420B
A
B
CAUTION
t
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
NOTE
t
To remove the stand, hold the top and bottom of stand, then pull it
out while also lowering it as shown below. (Only OLED55/65E6*)
1
2
1
2
t
To install the wall mount, use the stand assembly screws to attach
the Wall mount cover to the bottom of the product as shown in
the figure below. (Only when the item of the following form is
provided)
Provided item
Wall mount
cover
x 2
