ENG
ENGLISH
13
SIMPLINK function description
y
Direct Play
: Plays the multimedia device on the TV instantly.
y
Controlling devices with the TV remote control
: Manages
the multimedia device with the TV remote control.
y
Main Power off
: If
Auto Power Sync
is set to
on
in the
SIMPLINK settings and turn off your TV, the devices connected to
your TV via SIMPLINK will also be turned off.
y
Main Power on
: If
Auto Power Sync
is set to
on
in the
SIMPLINK settings, turning on a SIMPLINK-linked device will turn
the TV on. (Behavior may vary depending on connected device.)
To set password
(Settings) Safety Set Password
Sets or changes the TV password.
y
The initial password is set to ‘0000’.
y
When France is selected for Country, password is not ‘0000’ but
‘1234’.
y
When France is selected for Country, password cannot be set to
‘0000’.
To return Reset to Initial Settings
(Settings) General Reset to Initial Settings
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
y
When
Lock System
is in place, a pop-up window appears and
asks for password.
y
Do not turn off the power during initialization.
To remove the USB device
Select the connected USB HDD from
(Home)
Inputs
and
select the
eject
button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
y
Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
Using a USB storage device - warning
y
If the USB storage device has a built-in auto recognition program
or uses its own driver, it may not work.
y
Some USB storage devices may not work or may work incorrectly.
y
Use only USB storage devices formatted with the Windows FAT32
or NTFS File System.
y
For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
y
It is recommended that you use USB memory sticks of 32 GB or
less and USB HDDs of 2 TB or less.
y
If a USB HDD with power-saving function does not work properly,
turn the power off and on. For more information, refer to the user
manual of the USB HDD.
y
Data in the USB storage device can be damaged, so be sure to
back up important files to other devices. Data maintenance is the
user’s responsibility and the manufacturer is not responsible for
data loss.
My Media supporting file
y
Maximum data transfer rate: 20 Mbps (Mega bit per second)
y
External supported subtitle formats : *.smi, *.srt, *.sub
(MicroDVD, SubViewer1.0/2.0), *.ass, *.ssa, *.txt (TMplayer),
*.psb (PowerDivX)
y
Internal supported subtitle formats: XSUB (Supports internal
subtitles generated from DivX6)
