Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
WATER CIRCUIT | 55
W
ater Circuit Installation
WATER CIRCUIT INSTALLATION
Variable Water Flow Control Kit (Required Accessory)
Wiring for the Variable Water Flow Control Kit Valve
• The Variable Water Flow Control Kit can control a maximum of two valves. If only one valve is present, then the sub signal connector must
not be used.
• AWG 23 wiring is recommended for the power (AC 12V) line and signal (DC 0~10V) line.
AC 24V Power
Source for Variable
Water Flow Valve
DC 0~10V Control
Signal for Variable
Water Flow Valve
Main
Sub
Figure 29: Variable Water Flow Control Kit Wiring.