• Cross-border planning
:
By default Navigator plans routes using the
border crossing points. However, if you live
near the border, you can disable border
crossing with this switch to remain within
one country.
Language & Units (
)
Here you can set the languages, measure-
ment units, and date and time formats used
by the Navigator.
• Program language
:
This button displays the current written lan-
guage of the program. The Navigator will
have to be restarted if you change this set-
ting. The Navigator will ask for confirmation
before it restarts.
• Voice language
:
This button shows the current language of
the voice guidance.
• Units
:
You can set the distance units to be used by
the program. The Navigator may not support
all of the listed units in some voice guidance
languages.
• Set Date & Time Format
:
You can set the date and time format dis-
played by Navigator. Various international
formats are available.
Advanced (
)
These screens let you set a large number of
different advanced settings and initiate some
special functions. These settings and func-
tions are divided into groups.
Display Setup (
)
• Zoom in after find
:
When this switch is turned off, the Navigator
will centre the map to the location selected
in Find but will not change the zoom level. If
you turn this switch on, the Navigator will
also zoom in to the selected point.
• Coordinate display format
:
Positions are sometimes displayed with their
addresses, and sometimes with their coordi-
nates. This setting lets you choose between
displaying coordinates in degrees
(DD.DDDDD); degrees and minutes (DD
MM.MMM); or degrees, minutes and sec-
onds (DD MM SS.S).
Navigation menu
33