Connecting
18
C
onnecting
2
Router
Broadband
service
DLNA certified servers
Wired network setup
If there is a DHCP server on the local area
network (LAN) via wired connection, this unit will
automatically be allocated an IP address. After
making the physical connection, a small number
of home networks may require the unit’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the
[Settings] menu then press
ENTER
(
b
).
2. Read the preparations for the network settings
and then press
ENTER
(
b
) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
Advanced Setting
If you want to set the network settings manually,
use
W/S
to select [Advanced Setting] on the
[Network Setting] menu and press
ENTER
(
b
).
1. Use
W/S
to select [Wired] and press
ENTER
(
b
).
