Appendix
55
Appendix
6
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the unit will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn off the unit.
2. Use
A/D
to select a desired option and then
press
ENTER
(
b
).
[OK]
Starts the software update.
[Cancel]
Exits the update menu and turns
the power off.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (
B
) colored button to start the
update procedure.
Software update
You can update the unit using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
y
Before updating the software in your unit,
remove USB Device from the unit.
y
Before updating the software in your unit,
turn the unit off and then turn it back on.
y
During the software update procedure,
do not turn off the unit or disconnect AC
power, or do not press any button.
y
If you cancel the update, turn off the power
and turn it on for stable performance.
y
This unit cannot be updated to previous
software version.
,
Note
1. Check the network connection and settings
(page 17).
2. Select [Software] option in the [Settings] menu
then press
ENTER
(
b
).
3. Select [Update] option, and press
ENTER
(
b
).
The unit will check for the newest update.
y
Pressing
ENTER
(
b
) while checking for the
update will end the process.
y
If there is no update available, the Message,
“No update is found.” appears. Press
ENTER
(
b
) to return to the [Home Menu].
,
Note