Operating
25
Oper
ating
3
MIX
You can mix audio sounds.
1. Press
MIX
on the unit
.
“MIXER ON” is displayed. Select a desired
function for
side
1
and play it. Mix is available in
all functions except USB 2 and Optical.
2. During playback, insert a USB device in USB 2
port and play it.
side
2
is fixed as USB 2 function.
3. Move the cross fader to adjust the sound volume
of mixed sound.
Move it to the left to lower the volume of
side
2
and move it to the right to lower the
volume of
side
1
.
y
In MIXER ON mode,
-
You can adjust the Tempo for USB function
1 or 2.
-
If you press
C
/
V
,
Z
or
N
on the unit,
it works only for each side.
-
If you press
C
/
V
,
Z
or
N
on the
remote control, it works for both side
1
and side
2
.
-
For operating, it is recommended to use
C
/
V
,
Z
or
N
on the unit instead of
remote controls.
-
Numerical,
DELETE
buttons do not work.
-
You can use
H/P MODE
. (Page 39)
y
If you turn off the unit in the middle of mixing
process, MIX mode turns to OFF.
,
Note
TEMPO
You can adjust the Tempo for USB function from 50
(MIN) to 150 (MAX).
Rotate
TEMPO A
on the unit to adjust the tempo for
USB 1. Rotate
TEMPO
B
on the unit to adjust the
tempo for USB 2.
y
The tempo is set as 100 if you turn the unit
on/off or fully stop.
y
The tempo is kept when you pause and
resume play.
,
Note
AUTO SYNC
When using Mixing, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing
AUTO SYNC
on the unit
.
To stop it, press
AUTO SYNC
on the unit twice.
y
The tempo of music being played in USB 1 is
synchronized to that in USB 2.
y
TEMPO A
doesn’t work when AUTO SYNC
is on.
y
If USB 2 fully stops or function is changed,
AUTO SYNC function is cancelled.
y
In case of below, AUTO SYNC error may occur
depending on the sound source.
-
The silent section in the beginning of the
track.
-
Intro or bridge section in which few
musical instruments appear.
-
In cases where playback speed or tempo
of the song changes.
-
In case that the data for BPM is provided
in real time, not the beginning of the song.
y
If the song is being played too fast or slow,
press and hold
AUTO SYNC
.
‘AUTO SYNC RE-ANALYZING’ is displayed.
y
AUTO SYNC is available only when USB 1 is
selected for side
1
and USB 2 is selected for
side
2
in MIXER/DJ STAR ON mode and both
are being played.
,
Note
Summary of Contents for OL100N
Page 51: ......
