System Setting
24
Syst
em Setting
3
Lock (Parental Control)
Initial Setting the Area Code
When you use this unit for the first time, you have to
set the Area Code.
1. Select the [Lock] menu and then press
D
on the
remote control.
2. Press
D
on the remote control.
To access the [Lock] options, you must input the
password you have created.
Input a password and press
m
on the remote
control. Enter it again and press
m
on the remote
control to verify.
If you make a mistake before pressing
m
on the
remote control, press
CLEAR/DELETE
on the
remote control.
3. Select the first character using
W/S
on the
remote control.
4. Press
m
on the remote control and select the
second character using
W/S
on the remote
control.
5. Press
m
on the remote control to confirm your
Area code selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
D
on the remote control.
2. Input a password and press
m
on the remote
control.
3. Select a rating from 1 to 8 using the
W/S
on
the remote control.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4. Press
m
on the remote control to confirm your
rating selection.
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press
D
on the remote control.
2. Press
m
on the remote control.
3. Input a password and press
m
on the remote
control.
To change the password, press
m
on the remote
control when the [Change] option is highlighted.
Input a password and press
m
on the remote
control.
Enter it again and press
m
on the remote control
to verify.
4. Press
!
on the remote control to exit the menu.
If you forget your password, you can clear it
using the following steps:
1. Select the [Setup] menu on the
[Home Menu].
2. Input the 6-digit number “210499” and
press
m
on the remote control.
The password is cleared.
,
Note
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 55.
1. Select [Area Code] on the [Lock] menu then
press
D
on the remote control.
2. Input a password and press
m
on the remote
control.
3. Select the first character using
W/S
on the
remote control.
4. Press
m
on the remote control and select the
second character using
W/S
on the remote
control.
5. Press
m
on the remote control to confirm your
Area code selection.
