Operating
44
Oper
ating
4
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by pressing
MIC VOL -/+
.
y
When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
y
If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the
MIC VOL -
.
y
If sound through the microphone is extremely
loud, it may be distorted. In this case, set the
microphone volume
by pressing
MIC VOL -
.
y
You can give an echo effect to the sound from
the microphones by pressing
MIC ECHO
on the remote control or
MIC ECHO
/ DEMO
on the unit
.
,
Note
VOICE CANCELLER
You can reduce the vocal tones during music playback
from various input sources.
Press the
VOICE CANCELLER
on the remote control
and “ON-VOICE CANCELLER” will appear in display
window.
To cancel it, press
VOICE CANCELLER
on the remote
control again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
y
This function is available in the DVD/CD, USB
or BT (
Bluetooth
) Function.
y
If the function is not available, “NOT SUPPORT”
appears in the display window.
y
This function is available to use only when a
microphone is connected.
y
If a microphone is not connected, “INSERT
MIC” appears in the display window.
y
It is not available on the mono source.
y
To initialize it, change the function or
disconnect the microphone.
y
This function may not be initialized depending
on the status of connected devices.
,
Note
