LG OLED55C7P-C, Manual

7

ENGLISH

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully 

and install the wall mount bracket on a solid wall perpendicular to 

the floor. When you attach the TV to other building materials, please 

contact qualified personnel. LG recommends that wall mounting be 

performed by a qualified professional installer. We recommend the 

use of LG’s wall mount bracket. The LG wall mount is easy to adjust or 

to connect the cables. When you do not use LG’s wall mount bracket, 

please use a wall mount bracket where the device is adequately 

secured to the wall with enough space to allow connectivity to 

external devices. If you are using a non-adjustable mount, attach the 

mount to the wall. Attach the cables to the TV first, then attach the 

TV to the mount.

10cm

10cm

10cm

10cm

Make sure to use screws and wall mount bracket that meet the VESA 

standard. Standard dimensions for the wall mount kits are described 

in the following table.

Separate purchase (Wall mounting bracket)

Model

OLED55B7* 

OLED55/65C7* 

OLED65E7*

VESA (A x B)

300 x 200

Standard screw

M6

Number of screws

4

Wall mount bracket

OTW420B

A

B

•

Remove the stand before installing the TV on a wall 

mount by performing the stand attachment in reverse.

Connections (notifications)

Connect various external devices to the TV and switch input modes to 

select an external device. For more information of external device’s 

connection, refer to the manual provided with each device.  

Available external devices are: HD receivers, DVD players, VCRs, audio 

systems, USB storage devices, PC, gaming devices, and other external 

devices.

•

The external device connection may differ from the model.

•

Connect external devices to the TV regardless of the order of the 

TV port.

•

If you record a TV program on a DVD recorder or VCR, make sure to 

connect the TV signal input cable to the TV through a DVD recorder 

or VCR. For more information of recording, refer to the manual 

provided with the connected device.

•

Refer to the external equipment’s manual for operating 

instructions.

•

If you connect a gaming device to the TV, use the cable supplied 

with the gaming device.

•

In PC mode, there may be noise associated with the resolution, 

vertical pattern, contrast or brightness. If noise is present, change 

the PC output to another resolution, change the refresh rate to 

another rate or adjust the brightness and contrast on the {

Picture

} 

menu until the picture is clear.

•

In PC mode, some resolution settings may not work properly 

depending on the graphics card.

•

Some USB Hubs may not work. If a USB device connected using 

a USB Hub is not detected, connect it to the USB port on the TV 

directly.

•

If Ultra HD content is played on your PC, video or audio may 

become disrupted intermittently depending on your PC’s 

performance.

•

When connecting via a wired LAN, it is recommended to use a CAT 

7 cable.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•

Use a signal splitter to use more than 2 TVs.

•

If the image quality is poor, install a signal amplifier properly to 

improve the image quality.

•

If the image quality is poor with an antenna connected, try to 

realign the antenna in the correct direction.

•

An antenna cable and converter are not supplied.

•

Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, 

HE-AAC

•

This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts 

directly because the related standards have not been confirmed.