LG OSW100, Install Manual

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions. Keep these instructions.
Heed all warnings. Follow all instructions.

Warning

This wall mount should be installed by a trained 
and experienced installer designated by the 
retailer. 

Having the product installed by a non-
specialized installer is very dangerous and can 
cause damage or injury. 

Do not install the product where the weight 
cannot be supported. 

If the strength of the location where the wall 
mount is installed is not strong enough, it can 
fall off and cause an injury. 

Use a trained and experienced installer to 
move or replace the wall mount, if needed.

Installation requires special techniques. Moving 
or installing the product on your own can cause 
serious safety issues. 

After installing the wall mount, do not hang 
on the product or apply severe impact to the 
product. 

The product can fall off and cause injury. 

When installing the wall mount, never hang the 
power or signal cable on the rear side the TV. 

The cord can be damaged and cause a fire, an 
electric shock, or damage to the product.

Caution

Install the product according to the 
directions in the user manual.

If the product is not installed based on the 
directions in the user manual, it can cause a 
serious injury or damage to the product. 

When installing the product or adjusting the 
height of the product after installing, always 
do so with 2 people. 

Working alone can cause the product to fall off 
and result in injury or damage to the product.

During the installation, check the type of wall 
material and use the sealed anchor and 
screw if the conditions comply.

If you do not use the designated anchor or 
screw, the mount may not be able to withstand 
the weight of the product and cause a safety 
issue.

When drilling holes in the wall, always use a 
drill bit and drill of designated diameter. Also 
follow the designated directions for the 
depth of the hole. 

If the product is installed without following the 
designated method, the product may be 
unstable and cause a safety issue.

Do not wipe the product with a wet towel and 
do not use any heater or humidifier below 
where the product is installed. 

If water flows into the product or if moisture and 
heat are applied to the product, it can cause a 
fire, an electric shock, or problem to the product. 

Do not install the product near any object 
that may cause vibration. 
Do not install the product near  any high 
voltage power cable or power source.

Unplug the power cord from the power outlet 
before installing the product. 

If you install the product with the power cord 
plugged, it can cause an electric shock or a fire.

Do not install the product with bare hands. 
Always wear proper work gloves.

It can cause an injury. 

Do not allow the video connectors connected 
to the display to press against the wall. Use 
the included right-angle adapters if needed.

Only use attachments/accessories specified by 
the manufacturer.