background image

ENGLISH

4

BEFORE INSTALLATION

 

Do not use the product for purposes other than mounting a display on the wall.

 

When installing/using the wall mount, be cautious of product damage and avoid accidents.

 

Install the wall mount according to the installation manual.

 

If you have not fully read and understood the installation manual, do not install the product and contact the dealer to 

have a specialized installer install the product for you.

 

If you are not a professional installer, it would be advantageous to have  experience in a mechanical or construction 

field, this would be helpful to better understand this manual, and aid in installing the product correctly.

 

This product is designed to be mounted to walls that use standard intervals between the studs. 

 

Install the screw to attach the wall mount so that it can be assembled at the center from both ends of the studs. Use 

of a stud finder, a separate device, is recommended. 

 

Install the product only on a vertical wall. The manufacturer is not responsible for improper operation of product, 

when product is installed on an angled wall or on the ceiling.

 

Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for 

any damage or loss of accessories after the package has been opened.

 

Keep the included accessories out of reach of babies or children, it can cause safety issues including suffocation from 

swallowing the parts.

 

Make sure screws are tight against the wall, but do not overtighten.

Applying excessive force to screws may damage to the wall, affect the product performance, or cause the product to 

become damaged.

 

Be careful not to install a TV that exceeds the weight restrictions of the wall mount.

 

Be careful with the tools used during installation to prevent accidents or damage.

Tools you will need

Phillips head + driver (manual or motorized) / 8 mm socket wrench / Level / Drill / You may also need an Ø 4 mm drill 

bit for steel or an Ø 8 mm drill bit for concrete.

Summary of Contents for OTW630B















Reviews: