ENGLISH
7
3. How to install the wall mounting bracket
When mounting to wooden stud
5
1
406 mm
Drywall
Wood stud
2
Drywall
76 mm
Wood stud
3
Wall mounting screw
1
Locate the wood studs, installed at 406 mm intervals, and use a stud finder to mark the centers of the wood studs.
2
Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm or above where the wall mounting screw
location is marked on the wall. (Clean the drilled hole.)
3
Tighten the wall mounting screws for the wall bracket on the drilled hole.
→
At this time, tighten the screw so that the wall, wall mounting bracket and the wall mounting screw are pressed
against one another.
(Drywall can be damaged when tightened with excessive force, please be careful.)
→
When tightening the screw use the + driver (manual or motorized) or 8 mm wrench.
Summary of Contents for OTW630B
Page 13: ......
