ENGLISH
8
When installing on a masonry wall
Wall mounting screw
•
When aligning the wall mounting bracket to the location to install, mark the part to screw on the wall and then
remove the wall mounting bracket.
•
Refer to next picture to attach the wall mounting bracket.
•
Use a level to check whether the wall mounting bracket is level.
•
If the screw cannot be assembled in the designated location, it can be assembled by rearranging to the closest
location. But, do not change 2 or more locations from the designated spot.
•
Assemble the wall mounting screw on 3 left and 3 right location on the top part and 2 left and 2 right location on
the bottom part.
•
At this time, use a + driver (manual or motorized) or 8 mm wrench to tighten the screw so that the wall, wall
mounting bracket and screw are completely pressed against one another.
Summary of Contents for OTW630B
Page 13: ......
