26
MAGIC REMOTE CONTROL
To Register the Magic Remote Control
To use the magic remote control, register it with your projector first.
1
Turn on the projector and wait for about 10 seconds and then press
the
Wheel (OK)
button while pointing the remote control at the projector.
2
The remote control is automatically registered and the registration completion
message appears on the projector screen.
* If you failed to register the magic remote control, turn off the projector and try again.
To Re-register the Magic Remote Control
1
Press the
SMART
ㄮᗺ
ⰶᲳ
ⱞⳮ
➎Ẳ㞢
/Q.MENU
and
ㄮᗺ
ⰶᲳ
ⱞⳮ
➎Ẳ㞢
/Q.MENU
BACK
buttons together for about 5 seconds.
2
Press the
Wheel (OK)
button towards the projector to re-register the magic
remote control.
* Press the
SMART
ㄮᗺ
ⰶᲳ
ⱞⳮ
➎Ẳ㞢
/Q.MENU
and
ㄮᗺ
ⰶᲳ
ⱞⳮ
➎Ẳ㞢
/Q.MENU
BACK
buttonat the same time, for five seconds, to reset
the Magic Remote Control.
* Press the
ㄮᗺ
ⰶᲳ
ⱞⳮ
➎Ẳ㞢
/Q.MENU
BACK
button while pointing the remote control at the projector for five
seconds to reset and re-register it.
Summary of Contents for PA77U
Page 126: ......