Operating
13
Oper
ating
2
y
If you set ALARM1 and ALARM2 at the same
time, the ALARM1 function only works.
y
During the playback, if the time you set is
up, the function is switched to the function
you set for ALARM.
y
If the function you set for alarm does not
work, tuner function works automatically.
y
If the alarm stops, the function you set
works normally.
y
If you don’t set clock, the alarm function
doesn’t work.
y
In the TUNER, BUZZER, USB, IPOD mode, the
unit turns off at the preset time.
y
If you don’t connect the AC power cord to
the wall outlet, the alarm function doesn’t
work.
y
If you make a mistake while setting the
alarm, press and hold
ALARM
to reset the
alarm.
y
If you set the clock time, you can check the
time by pressing
ALARM
.
y
If you set the clock time and alarm, you
can check the alarm icon “ “and set
informaiton by pressing
ALARM
even
when the unit is turned off . Then this
function will work.
y
Since the alarm goes off, if you don’t press
any button for 10 minute, the alarm will stop
ringing automatically. (In only the BUZZER
mode)
y
When the alarm rings, you can turn off the
alarm by pressing all the buttons.(In only
the BUZZER mode.)
,
Note
Sleep Timer Setting
Press
SLEEP
repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn off. (You can see in the following
order, 180->150-> 120 -> 90 -> 80 -> 70 -> 60 -> 50
-> 40 -> 30 -> 20 -> 10)
To cancel the sleep function, press
SLEEP
repeatedly until “OFF “ appears.
SNOOZE function
This function wakes you up every 5 minutes if
you press
SNOOZE
. If the time you set is up, the
unit turns on automatically and the alarm rings. If
you press
SNOOZE
, the alarm stops ringing and
then the unit power off. The alarm rings again in 5
minutes.
y
If you set the “OFF time” between SNOOZE
time, SNOOZE time will be priority.
y
If you press
ALARM
,
SNOOZE function stop
working.
,
Note
PD36D-FP-AAUSLL-ENG.indd 13
11. 08. 26 �� 5:45