94
ENGLISH
Network Connection Problems
When X appears next to projector
•
Check the projector or the AP (Router).
•
Check the connection status of the projector, AP (Router) and Cable Modem.
•
Power off and power on in the following order;
1. The Cable Modem, wait for the Cable Modem to reset.
2. The AP (Router), wait for the AP (Router) to reset.
3. The projector.
•
If you are using a wireless connection, change the SSID (Network name) and
wireless channel of AP (Router).
•
If you are using a static IP, enter the IP directly.
•
Contact internet service provider or AP (Router) companies.
When X appears next to Gateway
•
Check the AP (Router) or consult your Internet service provider.
•
Unplug the power cord of the AP (Router), Cable Modem, wait 10 seconds.
Reapply power.
•
Initialize (Reset) on the AP (Router) or Cable Modem.
•
Contact internet service provider or AP (Router) companies.
•
Check the AP (Router) manufacturer’s website to make sure your router has the
latest firmware version installed.
When X appears next to DNS
•
Check the AP (Router) or consult your Internet service provider.
•
Unplug the power cord of the Cable Modem or the AP (Router), wait 10
seconds. Reapply power.
•
After the Cable Modem or AP (Router) has Initialized (Reset), try to reconnect.
•
Check that the MAC address of the projector/AP (Router) is registered with
your Internet service provider. (The MAC address displayed on the pane of
the network status window should be registered with your Internet service
provider.)
Summary of Contents for PF1000UW
Page 20: ...20 ENGLISH Back 1 2 3 No Description 1 Port 2 DC IN Port 3 Port ...
Page 43: ......
Page 140: ......
