21
USING THE PROJECTOR
USING THE PROJECTOR
Watching the Projector
Turning on the Projector
1
Connect the power cord correctly.
2
After waiting for a moment, press
the
POWER
button on the remote
control or the control panel.
(The light on the control panel will be
turned on.)
3
In the Language Selection screen,
select a language.
4
Select an input signal by using the
INPUT
button on the remote control.
Focus and Position of the
Screen Image
When an image appears on the screen,
check if it is in focus and fits the screen
properly.
HDMI/DVI
RGB IN
A/V IN
Focus ring
y
To adjust the focus of the image,
rotate the focus ring.
y
To adjust the focus ring, be careful
not to touch the keys on the control
panel.
Watching the Projector
1
In Standby mode, press the
POWER
button to turn the projector on.
2
Press the
INPUT
button and select
the input signal you want.
3
Control the projector using the
following buttons while watching
projector.
Button
Description
VOL -, +
Adjusts the volume level.
MUTE
Mutes all sounds.
Q.MENU
Accesses the quick menu.
RATIO
Resizes an image.
KEY.S u, v
Adjusts Keystone.
4
To turn the projector off, press the
POWER
button.