background image

3

ENGLISH

SafETy PrEcauTIoNS

SAFETY PRECAUTIONS

The precautions related with the safety shown below are to prevent unexpected hazard 
and damage through safe and accurate operation of the product.

 WarNING

If not followed, it can cause death or major injury to the user.

 cauTIoN

This symbol will alert you to the possibility of improper use that may result in damage. 
Read instructions to avoid damage or injury.

   This symbol will alert you to any product detail or operation that could lead to a 

safety hazard if the instructions in the manual are not followed properly.

 WarNING

• Do not arbitrarily change or extend the power line. 

This will be the cause of fire and electric shock.

• When using the multi-outlet, do not use several appliances at the same time. 

Excessive use of electric power will be the cause of fire and electric shock.

• When the outlet is damaged or loosened, do not use it. 

It will be the cause of fire and electric shock.

• When gas is leaked, perform the ventilation by opening the window before 

operating the air purifier or remote controller. 

Otherwise, it will be the cause of the explosion, fire, and burn.

• Do not use the product at the location where moisture or floating particles are 

prevailed such as toilet or bathroom, laundry, etc. 

This will be the cause of fire and electric shock.

• Carry out the installation by avoiding direct sunlight, heating appliance, and dampness. 

These will be the cause of the electric shock, fire, and failure.

• Do not apply any impact on the front panel. 

It can cause injury, product damage or electric shock.

• Do not turn off the product by unplugging the power. 

It can cause electric shock or problem to the product.

• Do not place fire source near to the product. 

This will be the cause of fire.

• Do not arbitrarily change or extend the power line. 

This will be the cause of fire and electric shock.

Summary of Contents for PH-U289 Series

































Reviews: