6
SAFETY PRECAUTIONS
•
Be careful not to tip the projector
over when connecting external
devices to the projector.
-
This may cause personal
injury or damage to the
projector.
Power
WARNING
•
The appliance coupler is used
as the disconnect device.
-
Please make sure the device
is installed near the wall
outlet to which it is connected
and that the outlet is easily
accessible.
•
The grounding wire should be
con nected.
-
Ensure that you connect the
ground ing cable to avoid
electric shock.If it is not
possible to ground the unit,
have a qualified electrician
install a separate circuit
breaker. Do not try to ground
the projector by connecting it
to telephone wires, lightning
rods or gas pipes.
•
The power plug should be
inserted fully into the power
outlet.
-
An unstable connection may
cause a fire.
•
Do not place heavy objects on
the power cord.
-
This may result in fire or
electric shock.
•
Never touch the power plug with
wet hands.
-
This may result in electric
shock.
•
Do not plug too many devices
into one multi-power outlet.
-
This may result in fire due to
the power outlet overheating.
•
Prevent dust from collecting on
the power plug pins or outlet.
-
This may result in fire.
•
To turn off the main power,
remove the power plug, which
should be positioned so it is
easy to access for operation.
CAUTION
•
Hold the plug firmly when
unplugging.
-
A damaged wire may create
a fire hazard.
•
Ensure the power cord and plug
are not damaged, modified,
severely bent, twisted, pulled,
sandwiched or hot. Do not use
the product if the power outlet
is loose.
-
This may result in fire or
electric shock.
•
Keep the power cord away from
heating devices.
-
The wire's sheath may melt,
which may result in fire or
electric shock.
Summary of Contents for PH300
Page 86: ......