LG PQRCVSL0, Owners & Installation Manual

Owner’s & Installation Manual 

19

E

N

G

L

IS

H

18

New Wide Wired Remote Controller

Function Code

Master/Slave

Select Master/ Slave by pressing 
button. 
(00: Slave, 01 : Master) 

3

Pressing and holding the        button 
for 3 seconds enters the remote 
controller setup mode. If it is not held 
for 3 seconds, it enters the user setup 
mode. 

1

If pressing       button repeatedly, it moves to 
override master/slave selection menu as 
pictured below.

2

Press        button to save.

4

Pressing the        button will exit the settings 
mode. If        is not pressed, the remote 
controller will automatically exit setup mode 
after 25 seconds with no input. If the set 
button is not pressed, the changes will not 
take effect. 

5

Installation Instructions

Installer Setting - Override Master/Slave Setting

Override master/slave selection function to prevent indoor units operate as cooling and heating mode
at same time.
Override slave set indoor units are operated flow master indoor unit’s mode.

Installation Instructions

Installer Setting - Remote Controller Master/Slave Setup 

Function Code

Master/Slave value

Select Master/ Slave by pressing 
button. 
(00: Slave, 01: Master)

3

Press        button to save.

4

Pressing and holding the        button 
for 3 seconds enters the remote 
controller setup mode. If it is not held 
for 3 seconds, it enters the user 
setup mode. 

1

If pressing        button repeatedly, it moves to 
master/slave selection menu as pictured 
below.

2

Pressing the        button will exit the settings 
mode. If        is not pressed, the remote 
controller will automatically exit setup mode 
after 25 seconds with no input. If the set 
button is not pressed, the changes will not 
take effect. 

5

It is a function for settings in group control, or 2-remote controller control. 

Remote controller 

Function 

Master

Indoor unit operates based on master remote controller at group control. 
(Master is set when delivered from the warehouse.)

Slave

Setup all remote controllers except one master remote controller to slave at
group control 

•

When controlling in groups, basic operation settings, airflow strength weak/medium/strong, 
lock setting of the remote controller, time settings, and other functions may be restricted. 

Refer to the 'group control' part for details

Override master/slave selection function is possible to use only when it is connected to the
succeeding models of Multi-V 7 series. 

•

If it is set as Override Slave,       icon 
is displayed on LCD Display Window. (See Figure 1)

Figure 1.