Owner’s & Installation Manual
43
E
N
G
L
IS
H
42
New Wide Wired Remote Controller
Robot cleaning function is the function of cleaner attached to the product to automatically clean filter
when using air-conditioner for the specific period of time.
Set manual or automatic mode of smart cleaning.
Owner's Instructions
Function setting - Robot Cleaning Automatic Setup
When flashes, press
button to set/clear this function.
Press button repeatedly until
the is flashing.
1
When returning to manual robot cleaning,
manual function is cancelled if moving to
'manual' icon by pressing Right/Left button
and then, pressing button.
3
Pressing the button will exit the
settings mode. If is not
pressed, the remote controller will
automatically exit setup mode
after 25 seconds with no input. If
the set button is not pressed, the
changes will not take effect.
4
2
Set state : Enable Auto Smart Clean function
Clear state : Disable Auto Smart Clean function
• Robot cleaning is an additional function and it might not be available on all types of indoor unit
Owner's Instructions
This feature locks the keypad to prevent any unwanted changes to the settings.
Function setting - Child Lock
Press button repeatedly until
the is flashing.
1
If moving to 'setup' icon area by
using button, 'setup' icon
blinks, and child lock function is
setup if pressing button at
that time.
2
When cancelling lock function, if moving
to 'cancel' icon by pressing button
and then, pressing button, child lock
function is cancelled.
3
Pressing the button will exit the
settings mode. If is not pressed, the
remote controller will automatically exit
setup mode after 25 seconds with no
input. If the set button is not pressed, the
changes will not take effect.
4
Summary of Contents for PQRCVSL0
Page 38: ......
