background image

Safety Precautions

Installation Manual 

3

ENGLISH

Entrust installation of the
product to the service center
because improper installation
may cause fire, an electric
shock, explosion, and physical
injury.

Use the original parts in
order to prevent fire, an
electric shock, explosion,
and product breakdown.

Keep combustible and/or
inflammable materials away
from the product in order to
prevent fire or product
breakdown.

Do not disassemble, repair, or
modify the product at your
discretion in order to prevent fire
or an electric shock.

Do not install the product in wet
and humid areas in order to
prevent product breakdown.

Do not expose the product to the
sun in order to prevent product
breakdown.

Installation

Service Center

Original Parts

Safety Precautions

• The installation requires expert skills, and it should be installed by the service center or other shops specialized

in the installation and recognized by our company.

• For all the problems arising after installation by someone who has no relevant qualifications, LG will not provide

free service.

• The following safety cautions are provided to prevent unexpected dangers or losses.

Meanings of symbols used in this manual are as shown below.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

WARNING

Summary of Contents for PQRNC0























Reviews: