22
OWNER’S INSTRUCTION
ENGLISH
OWNER’S INSTRUCTION
23
ENGLISH
Function setting - Elevation Grill
This function is to run the elevation grill to clean the filter of indoor unit.
Press
B
button repeatedly until
V
icon is blinking.
Move to DOWN using
H I
button, and press
K
button. DOWN icon displays and the elevation
grill will descend.
When the elevation grill descends to the desired point, move to ‘Stop’ icon using
H I
button
and press
K
button to stop the elevation grill.
When filter cleaning is finished, fix the filter to the gill, and move to UP icon using
H I
button.
And press
K
button to ascent the elevation grill.
Press
L
button to exit after setup.
If no button is selected for about 60 seconds after setup, it exits the elevation grill mode automatically.
If Set button is not selected before you exit, the changes will not apply.
• The elevation grill function is available only in the indoor unit with a built-in elevation grill.
Function setting - Zone Control
You can turn on/off the zones by used of it.
Press
B
button repeatedly until icon flash.
Press
H I
button to select the zone that which one you want to
turn on/off.
Press
K
button to turn on/off zone.
Press
H I
button to select other zones if you want.
Then, Press
K
button to turn on/off that zone as mentioned
above.
Press
L
button to exit or system will automatically release
without any input after 60 seconds.
When exiting without pressing set button, the manipulated
value is not reflected.
ENGLISH